Sharp Customs N54 Sheet Metal Port Injection Intake Manifold: Testing and Future Review!

[Snelson3003]

2 2 555-100403 3/8"NPT PIPE PLUG BLUE(2) 4.41 8.82
1 1 Spectre Performance 6038 4pk 1/8" NPT Pipe Plug 5.89

 

[Bmwfixerguy1]

Do to confirm the version you would buy from him today will take Ev14 the short style like ls3 I wanna say Idw?

 

[Bmwfixerguy1]

Revisions for the 3rd Manifold are:
-LS7 Style injectors work
-Fuel rail is now a tie down
-MAP sensor on Manifold is now shorter
-Throttle body flange adjusted.

This should be the final and most readily working one,

So I dug around through all the pages.. I knew I shouldn't have worked backwards lol page 4..

OP idk if we can edit the original post but maybe you could keep it current with the most recent info being there are so many revisions and the end result is much different thanks for all your work on this I know it's much appreciated by a lot of us!

 

[Gio911gio]

So what happened to this intake manifold any updates ???

 

[doublespaces]

So what happened to this intake manifold any updates ???

It was being sold and people run them. @Sharp sells them.

 

[Bmwfixerguy1]

It was being sold and people run them. @Sharp sells them.

I have one.not installed yet

 

[Bmwfixerguy1]

Does anyone know the thread on the manifold. I have one large and 3 small.
They I bought a 3/8 npt and 1/8 npt and they are both too large

 

[Sshec152]

Does anyone know the thread on the manifold. I have one large and 3 small.
They I bought a 3/8 npt and 1/8 npt and they are both too large

I had to use a 1/8 npt tap and a 3/8 not tap in order to use those threads. They were definitely cut wrong.

 

[Bmwfixerguy1]

I had to use a 1/8 npt tap and a 3/8 not tap in order to use those threads. They were definitely cut wrong.

Yes I'm finding this out now myself. Got my hands on both taps just need a 9/16th bit for the 3/8 npt tap

 

[ATL-IS-N54]

People who are running this what gains besides shiny heat sink have u been able to realize ?

 

[ATL-IS-N54]

And if so what kind of turbos (stock AM twins or ST)

 

[Bmwfixerguy1]

And if so what kind of turbos (stock AM twins or ST)

I don't think many gaims have been had with the Manifold alone but it's a clean solution for port injection

 

[doug@frankenturbo]

I don't think many gaims have been had with the Manifold alone but it's a clean solution for port injection

I've not seen any change in airflows with this manifold. It's simply a means for introducing port injection inexpensively.

 

[J.Wick]

I have the front facing version I’m willing to sell. Still in the box. With the update gaskets and a set of viton gaskets. Pm me for details.

 

[Bmwfixerguy1]

View attachment 6423 I have the front facing version I’m willing to sell. Still in the box. With the update gaskets and a set of viton gaskets. Pm me for details.

Your kidding me right LMAO! I searched and searched for one and like a week after I mount my other style you post up this l

Message me what your looking to get.. cash or trade ECT

 

[langsbr]

If you get one of these manifolds, is it possible to plug the injector holes if you don't want to run PI?

 

[Bmwfixerguy1]

If you get one of these manifolds, is it possible to plug the injector holes if you don't want to run PI?

Yes.. you can use injectors if you plan on going port in the future or they make dummy plugs as well

 

[langsbr]

Your kidding me right LMAO! I searched and searched for one and like a week after I mount my other style you post up this l

Message me what your looking to get.. cash or trade ECT

Google BK-3403 or go to bkcmotorsport.com

 

[Bmwfixerguy1]

Google BK-3403 or go to bkcmotorsport.com

Yes I know I already spoke to the guy.. I was just trying to get one in the states. I have the other already installed

 

[ccbsecu]

View attachment 6423 I have the front facing version I’m willing to sell. Still in the box. With the update gaskets and a set of viton gaskets. Pm me for details.

Interested - I’m in NC if you still have this for sale.