Latest activity
-
4For those wondering: I got it running by first uninstalling MHD (don't know whether that was necessary but I did it anyway). I then...
-
wheela reacted to whyzee125's post in the thread Need help with intermittent codes/warm start issue with
Like.
Ok, eons later I've got an update! Got a new genuine 3.5 TMAP sensor from Island Road and started to replace it. Pulled out my ER charge... -
ShocknAwe replied to the thread Walbro 450 on Pump Gas.Been a long time since that thread -
I read through your entire build thread just as couple days ago, beautiful piece of machinery sir
-
Wwhyzee125 replied to the thread Need help with intermittent codes/warm start issue.Ok, eons later I've got an update! Got a new genuine 3.5 TMAP sensor from Island Road and started to replace it. Pulled out my ER charge...
-
Ccampkillyourself replied to the thread Walbro 450 on Pump Gas.I read through your entire build thread just as couple days ago, beautiful piece of machinery sir
-
CI’m on 550 BHP crank on 98 Ron on tte500s…using a 450 with a mild EKP upgrade (the uprated main ic version)..been running for 15k miles...
-
HHaideezy replied to the thread Forged Pistons in a Brand-New N54 Block – Measurements?.You will definitely need a machine shop that's capable of over-boring the cylinders if you want to go with forged pistons (even with...
-
HHaideezy replied to the thread Turbo setup Route n54.I've been running a set of TPC Stg 2 turbos pretty hard on 24lbs of boost for the last year and have not had any issues with the turbo...
-
Neophyte replied to the thread I8A0S Burble tune / not very aggressive?.Leave the main table as normal. Please try Carabusers xdf at this post. Try -8 as suggested enjoy. -
-
KKahnzill replied to the thread DIY Silent Twin Plate Clutch UniClutch.Its drives fine. Better then 6hp with slipping clutchs. Had a DKM SMF kit on my 330ci and the chatter was like a whisper. Was a big...
-
ShocknAwe reacted to easy60's post in the thread BimmerFab VS Jack Fabrication N54 Single Turbo Kit Questions with Like.
I am definitely a prospective buyer, and I wouldn't be opposed to seeing the inside of the manifolds/collectors. Not really sure how...
-
xMoses88 replied to the thread I8A0S Burble tune / not very aggressive?.Thanks, do you have a video of the burble ? Maybe upload it on we.transfer. Would be nice to hear the difference You really did 5... -
2aesthetic4me replied to the thread I8A0S Burble tune / not very aggressive?.These are all the tables I modified in order to make burble work. On map 2 I slightly modified the burble ignition and I believe it made... -
-
2aesthetic4me reacted to xMoses88's post in the thread I8A0S Burble tune / not very aggressive? with Like.
Do you have a screenshot of the tables you used?
