QNX Development for CIC

AstroZ

Lurker
Apr 17, 2021
14
1
0
Thanks for posting that Jim, very interesting to see how you got it work. Still very impressed :)
 

aus335iguy

Colonel
Nov 18, 2017
2,267
813
0
Down under
Ride
335i DCT 2009
I agree, i think Jim is selling himself short. This is exactly the sort of thing I would like in my car and would pay good money for even today. Sure the display needs some colour. But the functionality is there. I’m impressed !
 

kirvedx

New Member
Sep 26, 2021
3
6
0
New York
www.mmod.co
Ride
2006 BMW 530 XI
I was looking into the patcher and investigating the CIC system itself when I happened on this thread that had more interesting ambitions. I just registered and introduced myself so I could dig in here - I'm going to take some time to read through everything from the start and look around but I hope to be able to dig in and contribute as an engineer.

👊
 
  • Like
Reactions: NoQuarter

veso266

New Member
Nov 19, 2020
3
1
0
Hi there, probably a noob question so sorry for that

I am realy tempted to play with this gears thing: https://www.spoolstreet.com/threads/qnx-development-for-cic.1821/post-16682

that @dolphin78 developed

well for start something that writes custom text and also captures input (like: You pressed X button full screen app, if someone already has something like this or I will have to figure out how to modify @dolphin78 example to write some custom text)

I am wondering if hard reboot to quit the app still works when the app is running (by holding the volume button in for 20-25 seconds continuously) if I have to kill slay -h HmiMain everytime I want to take full control of the user input)

since copie_scr.sh is my only acsess to the unit right now (no telnet or ftp uvailable) I am a bit afraid to get stuck in the app if I capture all the user input and no way to hard reboot the unit if I want everything back to normal

Thanks for Anwsering and Best Regards
 

zvahq

New Member
Mar 9, 2021
7
4
0
So, whats so special about it? Just aftermarket display/android or what i am missing in that video?
 

inotherwords

New Member
Apr 22, 2024
1
0
0
I doubt it's available from ch4. My understanding is ch4 is a gate to MOST bus while heated wheel button is not connected there.

There's a lot of data coming from ch5 but I don't know what that is. Could be CAN bus but I'm not familiar with the message format
Sorry for bumping such an old thread, but I found it quite interesting for me. I'm curious if there's an IPC for CAN available or not?
 

wes93

New Member
Jan 18, 2025
5
2
0
Hello, it's possible to start a process at CIC boot that when I Press a specific button stop to send the input to CIC?

My idea Is that I use a can adapter to control a Raspberry PI using iDrive2 and see android auto in the screen of CIC then block the CIC commands ad start works again only After another button Is pressed

Best regards
Stefano