I have been experiencing some issues with my Reflex+ Auxiliary Output 2, it is connected to my in-tank LPFP from BMP. I fully rewired the fuel pump, brand new relay, and tested continuity on the grey wire, everything worked perfectly for the past few days, when my Tuner finished the pump-gas tune, and asked me to fill with e85, I did just that (There were a few gallons of 91 in the tank). No other changes happened, and now I am not seeing 100% duty cycle which I was seeing literally 2 days prior. Just hoping to find some advice. I am pasting a link to both of the logs, the first one here will show the Duty Cycle at 100% just a few days ago:
Then cleared Lambda Regulation:
Now this is the log from this morning it hits 100% Duty Cycle at 20PSI:
Then cleared Lambda Regulation:
Now this is the log from this morning it hits 100% Duty Cycle at 20PSI:
