FREE CUSTOM MAPS
- Thread starter DaddyBoost
- Start date
-
- Tags
- bin flash only flash tuning free jb4 maps mhd n54 tuning
Im here to learn, and when possible to help others.This is a Great place for detailed troubleshooting, parts, advice etc. Great job to those who contributed. Why people take the time to harass other's on the web baffles my mind. Why the admin takes the time to call me out, also mind blowing.Especially after constant reminders of how tight your time is and the inconvenience of hosting this site is for you. Hey but at least this ecosystem you created feeds your ego.
not sure who you are but I wasn't referring to you. unless you and n54_409 are the same person ?
I seen a rating from you. I wanted to share my insight with you, as you gave the courtesy of reviwing my point of view. Some kids on here are super annoying. Hopefully you dont ever have to deal with a weeks worth of pages of notifications from these clowns.
Look at it this way: when a thread gets promoted to the Octagon, it's like making it to the pro's.
Filippo
Yeah it's better here ... where we mostly don't agree on most stuff and reminds us that in few cases do we seem to have definitive conclusions lol
Filippo
Filippo
Uploaded RFP Stage 1 and Stage 1.5 maps
Making Stage 2 and Stage 3 maps this week.
Download link can be found on my Facebook Page @RFPTuning
Stage 1 (Stock or DCI, CP) 13-15 psi 91/93/E40
Stage 1.5 (DCI, CP FMIC) 15-17 psi 91/93/E40
Stage 2 (DCI, CP, DP, FMIC+stage 2 LPFP if over E40) 17-18 psi 91/93/E40/E60
Stage 3 (FBO+Inlets+stage 2 LPFP) 18-21 psi 93/E40/E60
Anything above E40 mix make sure to drop a Wally LPFP in there
If you want methanol as well just PM me and I can make you a map for Methanol as each setup will be different. Suggested 30% water 70% methanol through a single cm10 Nozzle.This gonna run you $50 for meth map
Making Stage 2 and Stage 3 maps this week.
Download link can be found on my Facebook Page @RFPTuning
Stage 1 (Stock or DCI, CP) 13-15 psi 91/93/E40
Stage 1.5 (DCI, CP FMIC) 15-17 psi 91/93/E40
Stage 2 (DCI, CP, DP, FMIC+stage 2 LPFP if over E40) 17-18 psi 91/93/E40/E60
Stage 3 (FBO+Inlets+stage 2 LPFP) 18-21 psi 93/E40/E60
Anything above E40 mix make sure to drop a Wally LPFP in there
If you want methanol as well just PM me and I can make you a map for Methanol as each setup will be different. Suggested 30% water 70% methanol through a single cm10 Nozzle.This gonna run you $50 for meth map
Yes! Buy product right out of the Octagon, boys and girls!
Filippo
Filippo
There is way too much going on in that picture. Main question is where are the other 2 cylinders.... And welds OMG welds
Folks, the guy who is tuning your car can't figure out why 2 cylinders are missing. Holy fuck do not run his tunes.
No, you were not being sarcastic.
Despite all the upset people I finished Stage 2 maps and making stage 3 meant for inlets. Ready for download. Link on facebook page.
Enjoy
Enjoy
Similar threads
