@DOC_Race has officially unveiled the Group Buy details for their N54 intake manifold! Make sure you reserve your spot in line, there is a link at the bottom and a lot of good info below, check it:
[TBODY]
[/TBODY]
Order link will go live on Friday:
https://docrace.com/collections/n54/products/n54-intake-manifold-with-built-in-port-injection
After 2 years of waiting we are proud to present the Doc Race N54 Intake Manifold!
Two major hurdles preventing large numbers in our platform are fueling and the plastic box BMW decided to use for an intake manifold. We wanted to address both with one solution. As fabricators we knew this was an easy fix for us, but what about everyone else? After countless hours of R&D, testing, dyno time and general obsession, we decided on a design and started the ball moving forward to mass production. This was built by and for the true BMW Enthusiasts!
*****Product Details*****
On just 18lbs of Boost we were able to gain 23hp and 16ft/lbs of torque peak gains! We expect these to grow much higher as boost is increased and with the right tune. You can run extremely high boost, like over 50psi HIGH!!!
Now for the fun part! ONE TIME GROUP BUY PRICING!
The N54 community has grown to be larger than I think anyone could have anticipated and we have grown along with it. We want to give back and because of this we are offering our first 50 below dealer cost! There are only 50 spots available and we won't be making anymore until the first 50 have been delivered. If you are reading this, then the group buy and the price is still good. Act quickly! We will update the page weekly until we are sold out.
*****Group Buy Details*****
Pricing:Two major hurdles preventing large numbers in our platform are fueling and the plastic box BMW decided to use for an intake manifold. We wanted to address both with one solution. As fabricators we knew this was an easy fix for us, but what about everyone else? After countless hours of R&D, testing, dyno time and general obsession, we decided on a design and started the ball moving forward to mass production. This was built by and for the true BMW Enthusiasts!
*****Product Details*****
- Optional Port Injection including 6 Bosch Flow Tested and Match 42LB Injectors
- E85 Compliant Fuel Rail Kit (Plugs into Factory Fuel Sytem)
- Optional 3" Charge Pipe with BOV Flange
- CNC Machining performed in the US by OCD Works
- Durable Powdercoat Finish
- Superior Flow Design
- It's Sexy!
- Provision for OEM or aftermarket map sensor
- Provisions for (2) 1/8npt ports
On just 18lbs of Boost we were able to gain 23hp and 16ft/lbs of torque peak gains! We expect these to grow much higher as boost is increased and with the right tune. You can run extremely high boost, like over 50psi HIGH!!!
Now for the fun part! ONE TIME GROUP BUY PRICING!
The N54 community has grown to be larger than I think anyone could have anticipated and we have grown along with it. We want to give back and because of this we are offering our first 50 below dealer cost! There are only 50 spots available and we won't be making anymore until the first 50 have been delivered. If you are reading this, then the group buy and the price is still good. Act quickly! We will update the page weekly until we are sold out.
*****Group Buy Details*****
- 50% Deposit Required
- No Cancellations or Refunds
- Optional 3" Charge Pipe with BOV Flange (Group Buy Pricing)
- Expected Delivery first week of June 2018
- Extra Powder Coating color available for small fee (Email [email protected])
| Product | Retail | Group Buy Price | Deposit Amount |
| Intake Manifold w/o Port Injection | $1500 | $900 | $450 |
| Intake Manifold w/ Port Injection | $2000 | $1400 | $700 |
| 3" Charge Pipe w/ BOV Flange | $350 | $250 | $125 |
Order link will go live on Friday:
https://docrace.com/collections/n54/products/n54-intake-manifold-with-built-in-port-injection
