Latest activity
-
6ixInline reacted to shushikiary's post in the thread Forged Pistons in a Brand-New N54 Block – Measurements? with
Like.
Even if it's a new block you need to hone each cylinder to the piston manufacture's spec for that piston. The pistons may have some... -
6ixInline replied to the thread Forged Pistons in a Brand-New N54 Block – Measurements?.The reason I bought a brand-new block is that I couldn’t find a shop in Europe capable of honing the block to BMW’s specifications—none...
-
-
Well it's been a while since I last updated this. Fitted the JMC tuning kit. For the oil drain, I opted for his revised oil drain... -
wheela reacted to shushikiary's post in the thread Forged Pistons in a Brand-New N54 Block – Measurements? with Informative.
Even if it's a new block you need to hone each cylinder to the piston manufacture's spec for that piston. The pistons may have some... -
mfractal replied to the thread FS FS: NEW OEM index 12 fuel injectors full set ( 6 ) *$1650* - 2023 Build date.is this still available?
-
Sshushikiary replied to the thread Forged Pistons in a Brand-New N54 Block – Measurements?.Even if it's a new block you need to hone each cylinder to the piston manufacture's spec for that piston. The pistons may have some...
-
Hey everyone, I recently got a brand-new engine block and I’m looking to install forged pistons with a 9.5:1 compression ratio. Before I...
-
-
pbondar replied to the thread Walbro 450 on Pump Gas.I’m on 550 BHP crank on 98 Ron on tte500s…using a 450 with a mild EKP upgrade (the uprated main ic version)..been running for 15k miles... -
Eeasy60 replied to the thread BimmerFab VS Jack Fabrication N54 Single Turbo Kit Questions.These are the pics he supplied to me. Kit looks legitimately solid, and for that price point it would be difficult to beat, just needs...
-
-
ShocknAwe replied to the thread BimmerFab VS Jack Fabrication N54 Single Turbo Kit Questions.Photos of the inside of your 3:1 collectors and location of your 2:1 merge? -
ShocknAwe replied to the thread Walbro 450 on Pump Gas.Hydra stuff... N53 head HP800 twins schrick cams. I was running out of fuel above 7k rpm at anything above 15psi. Cars an animal.
-
Well it's been a while since I last updated this. Fitted the JMC tuning kit. For the oil drain, I opted for his revised oil drain...
-
Well it's been a while since I last updated this. Fitted the JMC tuning kit. For the oil drain, I opted for his revised oil drain... -
oVeRdOsE replied to the thread Walbro 450 on Pump Gas.wow you must run a serious setup. I ran my 328 high mileage lpfp for a while on a low 21 psi map, and I've changed it after I realized... -
ShocknAwe replied to the thread Walbro 450 on Pump Gas.No idea about any of that. I would say the 535 realizes anywhere from 120-150% flow over the 450 on 93 pump. It was a massive...
