Hey guys I got the following issue:
I exchanged a CAS3 Module for a friend and got new keys and the ISN matched (not important). The Problem is that the donor Car of the CAS3 was from a manual whereas the car it is supposed to go in is an 6AT. Now that's a problem because a manual CAS will wait for a clutch signal to start the engine whereas a 6AT CAS only needs the P or N position.
To fix this I simply wanted to code the CAS to the VO of the 6AT car which is straight up refused to to.
Points I noticed:
The CAS3 is Version C09 (the newest) but when selecting it in NCS is shows up as CAS2.C05 (wtf?). Only when Reading the Codierdaten it corrects to Cas 3 C09. But then when trying to SG_Codieren it errors out with COAPI-2060.
My guess was that my SP Daten were too old, yet I already updated to V69 and V71 and no success yet. Funny thing is that even the 2 other Laptops of my friends couldn't get it to code. I even found a CAS3_C09.ipo in my sgdat Folder.
Now I don't know what to do anymore. I updated SP Daten via the Coding Tool and made sure to also include WinKFP. I am not a novice coder but this keeps bugging me for 3 days now.
Does anyone know what to do? Thanks in advance
I exchanged a CAS3 Module for a friend and got new keys and the ISN matched (not important). The Problem is that the donor Car of the CAS3 was from a manual whereas the car it is supposed to go in is an 6AT. Now that's a problem because a manual CAS will wait for a clutch signal to start the engine whereas a 6AT CAS only needs the P or N position.
To fix this I simply wanted to code the CAS to the VO of the 6AT car which is straight up refused to to.
Points I noticed:
The CAS3 is Version C09 (the newest) but when selecting it in NCS is shows up as CAS2.C05 (wtf?). Only when Reading the Codierdaten it corrects to Cas 3 C09. But then when trying to SG_Codieren it errors out with COAPI-2060.
My guess was that my SP Daten were too old, yet I already updated to V69 and V71 and no success yet. Funny thing is that even the 2 other Laptops of my friends couldn't get it to code. I even found a CAS3_C09.ipo in my sgdat Folder.
Now I don't know what to do anymore. I updated SP Daten via the Coding Tool and made sure to also include WinKFP. I am not a novice coder but this keeps bugging me for 3 days now.
Does anyone know what to do? Thanks in advance
