335

In Canada, don't have E85 here. Highest is 94 on pump (weird that its one higher than 93 in America? Anyways). I have a stock 335i and here is my mod list that im planning on purchasing, will this land me at 400whp? VRSF CBE Street VRSF Catless DP BMS DCI BMS CP + Tial BOV VRSF 5" IC BMS Stock...

For those that would like to integrate the Low Pressure Fuel Sensor (LPFS) from the 135/335 into their Z4 35i/s I made this tutorial video. The video covers the mechanical and electrical aspects but you will need to consult a tuner for the firmware integration. I’m currently using it in...

Looking to buy a JB4 for my car. Located in East Coast Canada

Hello all, first forum post so I hope I do this right. Got my car in April this year(2010 BMW 335i e92), and it currently has 70k miles. Mods: VRSF Dual Cone Intake Upgraded Chargepipe VRSF 7.5" Intercooler BMS Oil Cooler Valve Maintenance: Valve Cover Gasket 65k miles Oil change when I got...

Hello all, So after ignoring all of your advice about not buying a 335I, I went and did it. Anyways, I have an interesting problem. When I set the JB4 Map to 0 and try and do a 3rd gear pull, the CEL comes on, with the error 30FF If I then put Map 1 back on, I can WOT without any engine...

GHASSAN AUTOMOTIVE 819 E 46TH AVE, STILLWATER OK 74074 405-780-1105 www.GhassanAuto.com Check out our Facebook page for more details at www.Facebook.com/GhassanAuto Ghassan Automotive would like to offer our N54 long block engines to the spool street community at a discounted price of $2995...

Just stopping by to say Hi. Lurked for awhile, couldnt find my old account so made a new one. Ill post some pictures of the ride from the laptop! 09 335 M sport. Few mods :). More to come this winter. Stand by I cant figure this out on the cell, nooooooob

Soooo... I've decided to post a bit about my build Starting with the story leading to my decision, So a few months back I had my oil pan gasket replaced. Upon removal of the pan we found shattered pieces of metal of what appeared to be a valve keeper and roller. I assumed it was from a...

We show how to make a professional wiring butt splice. This is the best and most secure way to make a wiring repair

Alright so I want to get my roof panel wrapped and i know i am going to remove the antenna so they can wrap the whole panel and just poke the hole through but what if I just removed the antenna and filled the holes and left it off? I don't have satellite radio and the nav doesn't work. Are there...